[RESEND] Re: slow, sluggish drawing with pencil & calligraphy tool solved

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

[RESEND] Re: slow, sluggish drawing with pencil & calligraphy tool solved

Bryce Harrington-3
----- Forwarded message from Mail Delivery Subsystem <[hidden email]> -----

Date: Sat, 3 Mar 2018 18:23:21 -0800
From: Mail Delivery Subsystem <[hidden email]>
To: [hidden email]
Subject: Returned mail: see transcript for details

The original message was received at Fri, 2 Mar 2018 13:44:02 -0800
from static-50-53-76-183.bvtn.or.frontiernet.net [50.53.76.183]

   ----- The following addresses had permanent fatal errors -----
<[hidden email]>
    (reason: 550 unknown user)

   ----- Transcript of session follows -----
... while talking to mx.sourceforge.net.:
>>> DATA
<<< 550 unknown user
550 5.1.1 <[hidden email]>... User unknown
<<< 503-All RCPT commands were rejected with this error:
<<< 503-unknown user
<<< 503 Valid RCPT command must precede DATA

Reporting-MTA: dns; vinyl.outflux.net
Arrival-Date: Fri, 2 Mar 2018 13:44:02 -0800

Final-Recipient: RFC822; [hidden email]
Action: failed
Status: 5.1.1
Remote-MTA: DNS; mx.sourceforge.net
Diagnostic-Code: SMTP; 550 unknown user
Last-Attempt-Date: Sat, 3 Mar 2018 18:23:21 -0800

Date: Fri, 2 Mar 2018 13:43:52 -0800
From: Bryce Harrington <[hidden email]>
To: Yale Zhang <[hidden email]>
Cc: Eduard Braun <[hidden email]>, [hidden email]
Subject: Re: [Inkscape-devel] slow, sluggish drawing with pencil &
 calligraphy tool solved

Hi Yale,

Thanks for working on this problem, it seems to be one of our top
blockers for the 0.93 release at the moment, so your work is very much
appreciated.

Can you update me on how things are going right now?  Are there
particular things you're stuck on?  I probably don't know enough to
offer advice myself but maybe can suggest someone that can.

If the issue looks like it can't be solved quickly, perhaps for testing
purposes it might help to add one or two environment variables to turn
on/off pieces of the UI or codebase that are causing problems.  So if
someone testing the renderer can do without the toolbar, they can
disable it at runtime?  Something like that?

In the coming weeks I'd like to produce a testing build of Inkscape, so
if there are some (ugly) ways to enable testers to work around the
performance bug that would help.

Bryce

On Fri, Feb 16, 2018 at 02:51:43AM -0800, Yale Zhang wrote:

> Thanks, I couldn't find it because I was expecting the status bar to be
> drawn by Cairo. I tried to increase the priority of UPDATE_PRIORITY &
> SP_UPDATE_SELECTION_PRIORITY, but couldn't do so without causing the ruler
> & status bar updates to starve.
> I conclude that UPDATE_PRIORITY cannot have any higher priority than
> GDK_PRIORITY_REDRAW. Even when those priorities are the same, the status
> bar will always get drawn before canvas because SPDesktopWidget::
> setCoordinateStatus() is called before SPCanvas::addIdle().
>
>
> I've pushed my changes (I did some git resets instead of revert so it's
> diverged). Hopefully now, you can approve?
> Sorry about the back and forth over the rulers & status bar not updating.
> Shouldn't have been greedy about reducing latency by 2ms by setting
> UPDATE_PRIORITY = GDK_PRIORITY_EVENTS :)
>
>
> On Thu, Feb 15, 2018 at 3:58 PM, Eduard Braun <[hidden email]> wrote:
>
> > Am 15.02.2018 um 12:23 schrieb Yale Zhang:
> >
> > I've updated my custom cross compiler to use MSYS2 packages and finally
> > saw the lack of rule/status bar updates. Unfortunately, it had nothing to
> > do with using MSYS2. I just didn't look hard enough earlier :(
> > The earlier versions (including the binaries) did suffer the problem but
> > only when dragging large rectangles. Plus I had _INKSCAPE_DISABLE_CACHE=1,
> > making the problem less noticeable.
> >
> > So now I know what's wrong. The ruler update priority is G_PRIORITY_LOW =
> > 300, while UPDATE_PRIORITY in SPCanvas::addIdle() is GDK_PRIORITY_EVENTS =
> > 0, so it's no mystery who loses.
> >
> > Changing UPDATE_PRIORITY back to GDK_PRIORITY_REDRAW + 10 fixes the
> > problem. But the ~10ms less latency for immediate drawing (#3) now is
> > reduced because a ~2ms delay is added between SPCanvas::addIdle() and
> > SPCanvas::paint().
> >
> > Of course, this is perfectly usable, but I have an itch to further
> > improve. That 2ms latency is gone if I disable the status bar, so I'd like
> > to do the status bar updates after SPCanvas::paint().
> >
> > But I can't find where the status bar is being drawn. Do you?
> > And also, what is SP_DOCUMENT_UPDATE_PRIORITY and
> > SP_DOCUMENT_ROUTING_PRIORITY in document.cpp? I don't know if those need to
> > be rebalanced.
> >
> >
> > The coordinates are updated by calling "SPDesktop::set_coordinate_status"
> > in "desktop.cpp" (which calls "SPDesktopWidget::setCoordinateStatus" in
> > "desktop-widget.cpp").
> >
> >
> >
> > -yale
> >
> >
> > On Wed, Feb 14, 2018 at 2:30 AM, Eduard Braun <[hidden email]>
> > wrote:
> >
> >> Am 14.02.2018 um 11:09 schrieb Yale Zhang:
> >>
> >> Good, we're getting closer to the same page. Can you please tell me which
> >> of my commits did you include in your testing? If dragging is still
> >> lagging, it sounds like you didn't take change #2 (priorities). You
> >> complained it didn't help or made things worse, but it should be quite the
> >> opposite.
> >>
> >>
> >> As I wrote: I checked out 0bde236 and built the resulting code. It should
> >> therefore have contained all you latest (public) changes.
> >>
> >>
> >> Let me get the MSYS2 headers & libs and do a build to rule out any
> >> library issues.
> >>
> >>
> >> This would certainly help... Even though you keep telling me the stock
> >> builds *should* behave differently with your changes - they don't. If
> >> you're able to test yourself we'll probably safe ourselves some back and
> >> forth as seeing is believing. ;-)
> >>
> >>
> >> "warn me next time it's not relocatable" - I think all you have to do to
> >> relocate was regenerate immodules.cache & loaders.cache. I wonder how the
> >> release packages of Inkscape & Gimp avoid this problem.
> >>
> >>
> >> Ah, if they contain absolute paths that might have been it. As for the
> >> release packages: they contain relative paths in imloaders.cache (MSYS2
> >> contains a relocation patch for gdk-pixbuf2). Earlier versions (built wit
> >> devlibs) included the loaders in libgdk_pixbuf-2.0-0.dll to work around
> >> this (it's a built option)
> >>
> >>
> >>
> >> Yes, my version should be quite fast, but it has little to do with the
> >> GDK optimizations. You should see the same benefits with vanilla GTK
> >> (GTK_CSD=1). For the optimized version, there should be no performance
> >> difference for GTK_CSD because I force the rendering code path to what
> >> GTK_CSD=0 uses, plus some optimizations.
> >>
> >> "I'm not able to resize the Window"
> >> Sorry, I forgot to mention it has my optimized, but work in progress
> >> libgdk-3-0.dll. Please roll back to the stock version
> >> (libgdk-3-0.dll.orig). The optimized one keeps a persistent Cairo Win32
> >> surface for window updates, but resizing isn't handled.
> >>
> >>
> >>
> >> On Tue, Feb 13, 2018 at 6:27 PM, Eduard Braun <[hidden email]>
> >> wrote:
> >>
> >>> I was now able to build 0bde236
> >>>
> >>>    - With the status bar visible I'm getting super fast redraws of the
> >>>    status bar with some occasional redraws of the rulers but everything else
> >>>    is locked when moving a rect.
> >>>    - With the status bar hidden I'm getting more redraws now and also
> >>>    infrequent redraws of the whole UI, however moving the rect is still
> >>>    extremely sluggish.
> >>>    - With the status bar and rulers hidden moving the rect has a usable
> >>>    redraw speed, rest of the UI (now only values in select toolbar I guess)
> >>>    update infrequently.
> >>>
> >>> Comparing with your build linked before (warn me next time it's not
> >>> relocatable, I had to move it to C:\Users\Yale\inkscape.gmesh ;-) ) there
> >>> are some grave differences:
> >>>
> >>>    - Redraw is in fact much faster with your version - are these the
> >>>    gdk changes? Or are we really on to something fundamental?
> >>>    This is also true for GTK_CSD=0!
> >>>    - Also the rest of the UI is updated much more frequently, even with
> >>>    the status bar visible
> >>>    - In your version I'm not able to resize the Window (or rather I can
> >>>    but the parts that were not shown initially are not redrawn and only show
> >>>    some graphical garbage. Is this related to you gdk changes?
> >>>
> >>>
> >>> Am 12.02.2018 um 13:57 schrieb Eduard Braun:
> >>>
> >>> Am 12.02.2018 um 13:12 schrieb Yale Zhang:
> >>>
> >>> Eduard, please pull change #2 (fix priority inversion) before the
> >>> immediate rendering changes. Without it, the lack of status bar & ruler
> >>> updates are expected.
> >>>
> >>>
> >>> I think we're running in circles here... Most of my comments (as well as
> >>> yours regarding direct drawing) referred to #3.
> >>> The only issue I had with #2 was that Rulers seem still to be updated
> >>> with a high priority and prevented the canvas to redraw (in stock MSYS2
> >>> builds and therefore with CSD=0).
> >>>
> >>>
> >>> Yes, I am using CSD=1 in my testing (for both optimized & original GTK).
> >>> But CSD isn't the actual reason for performance difference. It's because of
> >>> the rendering code path CSD=1 uses (draw to CPU memory buffer, then send to
> >>> UpdateLayeredWindow()), vs CSD=0  (draw directly to GDI device context -
> >>> surprisingly this is slower until my optimizations).
> >>>
> >>>
> >>> Please note that CSD=0/1 in our stock MSYS2 builds makes a *huge*
> >>> difference. If that is really not the case for your custom builds we might
> >>> want to start looking into that, too. Maybe we're facing at a more
> >>> fundamental difference. As MSYS2 is the official way to get GTK+ for
> >>> Windows nowadays such a difference might be very relevant for many projects.
> >>>
> >>> Are your cross-compiled libraries using mingw-w64? Which OS are you
> >>> using btw? (I'm usually testing on Windows 10 - I'd not be surprised if
> >>> there's some major difference compared to e.g. Windows 7 wrt to the low
> >>> level drawing functions).
> >>>
> >>> I'm very interested in testing your GDK-modifications and see how they
> >>> behave with the MSYS2 builds, so if you could drop a patch somewhere that
> >>> would be much appreciated!
> >>>
> >>> I did get an error from the CI build after the multithreaded rendering
> >>> feature. It doesn't even get past CMake configure stage, so not very
> >>> useful. That's because the build server doesn't have the Boost libs (which
> >>> I use, not just the headers).
> >>>
> >>>
> >>> I think you looked at the Linux build - Windows CI is "external" via
> >>> AppVeyor and has the required Boost libraries. It's just not working in
> >>> your branch right now because an upstream update broke updating but I
> >>> pushed a workaround for this already in the master branch [1] (that's why I
> >>> suggested to rebase)
> >>>
> >>> [1] https://gitlab.com/inkscape/inkscape/commit/85d7fa343f477d8f
> >>> aae6cbde90ae7a243115fa37 (I messed up the rebase so it's authored by
> >>> Tav, sorry for that)
> >>>
> >>>
> >>>
> >>>
> >>> On Mon, Feb 12, 2018 at 2:41 AM, Eduard Braun <[hidden email]>
> >>> wrote:
> >>>
> >>>> Am 12.02.2018 um 10:15 schrieb Yale Zhang:
> >>>>
> >>>> "As noted before, when rulers are shown there still is no redraw with
> >>>> this change"
> >>>> It works for me on Windows with rulers. Could it be some out of date
> >>>> libraries? I'm still using a custom built cross compiler & libraries (GTK
> >>>> 3.22.26 & glib 2.54.2). I know you're using the MSYS 2 prebuilt libraries.
> >>>> I've been wanting to use those too, but how recent are they?
> >>>>
> >>>>
> >>>> They are usually the latest available (think of MSYS2's MINGW-packages
> >>>> as arch Linux for Windows), right now gtk 3.22.26 and glib 2.54.3.
> >>>>
> >>>> Aside from disabling CSD they are unpatched. Just to make sure we're
> >>>> not comparing apples and oranges: Are you using CSD in your builds or not?
> >>>> This switch made a huge difference before, so if you're working with CSD
> >>>> enabled this might be the likely explanation why some things work in your
> >>>> builds that do not work in the stock builds.
> >>>>
> >>>>
> >>>> "It seems that the immediate drawing of the canvas basically disables
> >>>> drawing of the rest of the UI"
> >>>>
> >>>> You scared me, that would be a most grievous mistake. I just tested it
> >>>> again and don't see any problem. The rulers and status bar still work when
> >>>> dragging an object. Did you build my stream directly or have any other
> >>>> non-trunk changes? Sorry to suggest this but here are binaries you can
> >>>> test. Maybe try copying the GTK & cairo? libs to your build.
> >>>> https://1drv.ms/u/s!AngRQgSreBCehy4R7D3x3Y2vIXPC
> >>>>
> >>>>
> >>>> I used https://gitlab.com/inkscape/inkscape/commit/78d47938194fc52e
> >>>> e085387d9a0dc0753f3ed6d9 as the later commits did not compile for me.
> >>>>
> >>>> I'll check your build this evening.
> >>>>
> >>>> We also have CI builds with MSYS2 available:
> >>>> https://ci.appveyor.com/project/inkscape/inkscape/history
> >>>> If you rebase your branch on master your branch will be built, too (as
> >>>> long as there are not more errors/warnings preventing the build)
> >>>>
> >>>> I hope you're not suggesting to forget about immediate drawing and just
> >>>> fix the drawing priorities. Using priorities would be easier to break,
> >>>> while drawing immediately is fool proof.
> >>>>
> >>>>
> >>>> I'm just saying that priorities have been tweaked before to make all UI
> >>>> update properly and we should aim to retain this state.
> >>>> If direct drawing is compatible with this goal (I guess it was in gtk2)
> >>>> that's probably fine.
> >>>>
> >>>>
> >>>> "Have you published [GTK3] code anywhere? "
> >>>> No, I haven't had time yet. I also want to discuss the problem I posed
> >>>> on StackOverflow and someone suggested IRC, but that I've never used IRC
> >>>> and it sounds very 1990s.
> >>>>
> >>>>
> >>>> It's like SMS... it just works (even today)...
> >>>> A lot easier than all the modern stuff that claims to be easier than
> >>>> IRC.
> >>>>
> >>>> I've talked to gtk devs on IRC before and it's the easiest way to get
> >>>> some interaction (bug reports usually fall into oblivion sooner rather than
> >>>> later).
> >>>>
> >>>>
> >>>> BTW, the optimized GTK also disables clearing the region to be drawn
> >>>> (gdk_window_clear_backing_region()).
> >>>>
> >>>> "Is [render cache] always slow?"
> >>>> It's only much slower if drawing a big area AND the scene complexity is
> >>>> low. For small areas and high complexity scenes, the overhead is much less
> >>>> noticeable.
> >>>>
> >>>>
> >>>> I see... I guess before the low complexity scenes were not that
> >>>> important as redraw times were sufficiently fast anyway.
> >>>> User reports of slow redrawing usually involve blurs (or less
> >>>> frequently other filters).
> >>>>
> >>>>
> >>>> For the multithreaded rendering, it's still a work in progress. AFAIK,
> >>>> I've eliminated all the race conditions with ThreadSanitizer, so it should
> >>>> be stable.
> >>>> I just pushed some further changes to allow the rendering to be
> >>>> incremental like it always has been. It should have that -fpermissive
> >>>> compile error in sp-canvas.cpp fixed, but you might still need it for other
> >>>> files.
> >>>>
> >>>>
> >>>> I'll try to build this evening.
> >>>> As recommended before you could check the CI to make sure your branch
> >>>> is properly built, which should help with testing.
> >>>>
> >>>> Regards,
> >>>> Eduard
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> On Sun, Feb 11, 2018 at 8:37 AM, Eduard Braun <[hidden email]>
> >>>> wrote:
> >>>>
> >>>>> Hi Yale,
> >>>>>
> >>>>> thanks for continuing to investigate this! Some comments:
> >>>>>
> >>>>>
> >>>>> Am 09.02.2018 um 16:02 schrieb Yale Zhang:
> >>>>>
> >>>>> I have an update on my progress. I've made these changes which I'm
> >>>>> requesting to be merged from my simdgenius_inkscape branch
> >>>>>
> >>>>> 1. disable event compression (previously mentioned)
> >>>>>
> >>>>> 2. fix priority inversion (09f55021, previously mentioned) - without
> >>>>> this, dragging objects too fast would cause no redraw.
> >>>>>
> >>>>>
> >>>>> As noted before, when rulers are shown there still is no redraw with
> >>>>> this change
> >>>>>
> >>>>>
> >>>>> 3. draw immediately (78d47938) this partially reverts Krzysztof's
> >>>>> Hack fest 2016 changes like in 0.92.  This reduces latency by ~10ms
> >>>>> (compare cells G22 and E22 in spreadsheet)
> >>>>>
> >>>>> I originally wanted to remove backing store and draw directly to the
> >>>>> window surface, but I ran into this dilema so I didn't do it.
> >>>>>
> >>>>> https://stackoverflow.com/questions/48339792/when-drawing-to
> >>>>> -a-window-are-the-previous-contents-usually-discarded-and-what
> >>>>>
> >>>>>
> >>>>> While this change does indeed speed up drawing a lot I'm not sure it's
> >>>>> for the reason we hope for:
> >>>>> It seems that the immediate drawing of the canvas basically disables
> >>>>> drawing of the rest of the UI (i.e. rulers, coordinates in the lower right,
> >>>>> coordinates in inputs, etc). If I hide all UI elements (Ctrl+F11) I get the
> >>>>> same perceived performance even without your code change.
> >>>>>
> >>>>> While I guess redrawing the canvas is to be preferred over redrawing
> >>>>> other UI elements, not redrawing the rest of the UI at all is probably not
> >>>>> desirable either.
> >>>>> Also it poses the question: Why did gtk2 manage to redraw the canvas
> >>>>> *and* the UI and still yield higher performance than gtk3? So I'm not sure
> >>>>> we're not still missing the actual regression. :-/
> >>>>>
> >>>>>
> >>>>> But there is still way more speedup to be had:
> >>>>>
> >>>>> 1. *rendering cache slows things down 6x!*  Compare cells E9 & E10 in
> >>>>> the spreadsheet.
> >>>>>      WTH?
> >>>>>
> >>>>>
> >>>>> Is it always slow? I guess for something simple like a rectangle it
> >>>>> might not improve things, but maybe things start to change as soon as
> >>>>> filters are involved (or many nodes or anything else that is not easy to
> >>>>> render)?
> >>>>> I admit I was not involved when the rendering cache was added and do
> >>>>> not know its purpose. I tracked down the commit in which it was added [1]
> >>>>> which does not explain anything either, though, so I need to continue
> >>>>> digging... If anybody knows where the changes are actually explained some
> >>>>> feedback is welcome.
> >>>>>
> >>>>> [1] https://gitlab.com/inkscape/inkscape/commit/093f4174abc07b4e
> >>>>> a523617fccdd8028f2670fea
> >>>>>
> >>>>>
> >>>>> 2. optimize GDK (maybe it's only slow on Windows) - compare cells J17
> >>>>> and J23
> >>>>>       I made 2 changes:
> >>>>>       a. disabled layered windows - this is almost the same effect as
> >>>>> setting GTK_CSD=0. I'm not clear why it speeds things up. I'm guessing it
> >>>>> reduces image copying. Layered windows have to draw to CPU memory (GDI
> >>>>> DIB), while non-layered windows draw directly to GPU memory (device
> >>>>> dependent bitmap)?
> >>>>>
> >>>>>       b. replace surface_content = gdk_window_get_content (window);
> >>>>>  in gdk_window_begin_paint_internal()
> >>>>>           with surface_content = CAIRO_CONTENT_COLOR_ALPHA
> >>>>>
> >>>>>           why create/delete a surface just to get the type?
> >>>>>
> >>>>>
> >>>>> Have you published this code anywhere? Also is there any upstream
> >>>>> discussion on this yet which I could follow?
> >>>>>
> >>>>>
> >>>>> 3. multithreaded rendering - I've updated it to work with trunk, so
> >>>>> you can try it. Very little speed up for simple scenes.
> >>>>>
> >>>>>
> >>>>> Unfortunately the code does not compile for me, excerpt from the error:
> >>>>>     sp-canvas.cpp:802:22: error: passing 'const boost::shared_mutex'
> >>>>> as 'this' argument discards qualifiers [-fpermissive]
> >>>>>
> >>>>> Do you want us to compile your code with -fpermissive?
> >>>>>
> >>>>>
> >>>>>
> >>>>> -Yale
> >>>>>
> >>>>>
> >>>>> Regards,
> >>>>> Eduard
> >>>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>> ------------------------------------------------------------------------------
> >>> Check out the vibrant tech community on one of the world's most
> >>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Inkscape-devel mailing [hidden email]://lists.sourceforge.net/lists/listinfo/inkscape-devel
> >>>
> >>>
> >>>
> >>
> >>
> >
> >

> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot

> _______________________________________________
> Inkscape-devel mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/inkscape-devel



----- End forwarded message -----

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Inkscape-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Reply | Threaded
Open this post in threaded view
|

Re: [RESEND] Re: slow, sluggish drawing with pencil & calligraphy tool solved

Yale Zhang
Bryce, glad to help. I'm curious why the urgency now? It seems the GTK3 port has been slow for years. Is it because 0.93 will be the 1st release with GTK3? However, the slowness isn't anything fundamental to GTK3.

The biggest problem right now is dragging an object too fast will cause it to redraw at a very slow rate or not at all. The problem gets worse the longer it takes to draw the object. The problem was the Selection::_scheduled_modified()  and SPCanvas::addIdle()  events had higher priority than the repaint (expose) events, causing starvation, so I rebalanced the priorities. I've fixed this in commit  09f55021be0ad36a1f70e33326401a70de4e6903 of simdgenius_inkscape.

This problem doesn't happen in 0.92 because the rendered canvas is immediately sent to the window's surface instead of scheduling it later with an expose event (gtk_widget_queue_draw_area()), which could starve. The change away from immediate refresh  happened at a 2016 Hackfest by Krzysztof. I don't see any good reason to do it that way and I didn't get any response from him. I'm guessing it's because the function to get the window's surface, gdk_cairo_create() was deprecated. But you can replace it with  gdk_window_begin_draw_frame().

So I've partly reverted his changes in commit  79e74d8bfaec6a2b9b754a38f1656d8e8db71465. It reduces latency by 10ms. Maybe it depends on whether ruler and status bar are on. The other benefit is it only sends the invalidated area instead of the whole canvas like  SPCanvas::handle_draw() does.


Eduard has been testing my changes. He did see the canvas update faster, but found the ruler and status bar redraw became slower. I thought I've fixed them but I've lost track.
I think what would help is to have a set of automated tests to measure things like mouse move to redraw latency, drawing throughput for canvas, latency & throughput for rulers & status bar...


The biggest unsolved problem I'd say, is the slow render cache. When drawing a large, flat shaded rectangle, disabling the cache (_INKSCAPE_DISABLE_CACHE=1) speeds up the drawing 6x! For complex scenes, the slow down is much less noticeable.

Note: all my observations and testing have been mostly on Windows

-Yale

On Sun, Mar 4, 2018 at 1:53 PM, Bryce Harrington <[hidden email]> wrote:
----- Forwarded message from Mail Delivery Subsystem <[hidden email]> -----

Date: Sat, 3 Mar 2018 18:23:21 -0800
From: Mail Delivery Subsystem <[hidden email]>
To: [hidden email]
Subject: Returned mail: see transcript for details

The original message was received at Fri, 2 Mar 2018 13:44:02 -0800
from static-50-53-76-183.bvtn.or.frontiernet.net [50.53.76.183]

   ----- The following addresses had permanent fatal errors -----
<[hidden email]>
    (reason: 550 unknown user)

   ----- Transcript of session follows -----
... while talking to mx.sourceforge.net.:
>>> DATA
<<< 550 unknown user
550 5.1.1 <[hidden email]>... User unknown
<<< 503-All RCPT commands were rejected with this error:
<<< 503-unknown user
<<< 503 Valid RCPT command must precede DATA

Reporting-MTA: dns; vinyl.outflux.net
Arrival-Date: Fri, 2 Mar 2018 13:44:02 -0800

Final-Recipient: RFC822; [hidden email]
Action: failed
Status: 5.1.1
Remote-MTA: DNS; mx.sourceforge.net
Diagnostic-Code: SMTP; 550 unknown user
Last-Attempt-Date: Sat, 3 Mar 2018 18:23:21 -0800

Date: Fri, 2 Mar 2018 13:43:52 -0800
From: Bryce Harrington <[hidden email]>
To: Yale Zhang <[hidden email]>
Cc: Eduard Braun <[hidden email]>, [hidden email]
Subject: Re: [Inkscape-devel] slow, sluggish drawing with pencil &
 calligraphy tool solved

Hi Yale,

Thanks for working on this problem, it seems to be one of our top
blockers for the 0.93 release at the moment, so your work is very much
appreciated.

Can you update me on how things are going right now?  Are there
particular things you're stuck on?  I probably don't know enough to
offer advice myself but maybe can suggest someone that can.

If the issue looks like it can't be solved quickly, perhaps for testing
purposes it might help to add one or two environment variables to turn
on/off pieces of the UI or codebase that are causing problems.  So if
someone testing the renderer can do without the toolbar, they can
disable it at runtime?  Something like that?

In the coming weeks I'd like to produce a testing build of Inkscape, so
if there are some (ugly) ways to enable testers to work around the
performance bug that would help.

Bryce

On Fri, Feb 16, 2018 at 02:51:43AM -0800, Yale Zhang wrote:
> Thanks, I couldn't find it because I was expecting the status bar to be
> drawn by Cairo. I tried to increase the priority of UPDATE_PRIORITY &
> SP_UPDATE_SELECTION_PRIORITY, but couldn't do so without causing the ruler
> & status bar updates to starve.
> I conclude that UPDATE_PRIORITY cannot have any higher priority than
> GDK_PRIORITY_REDRAW. Even when those priorities are the same, the status
> bar will always get drawn before canvas because SPDesktopWidget::
> setCoordinateStatus() is called before SPCanvas::addIdle().
>
>
> I've pushed my changes (I did some git resets instead of revert so it's
> diverged). Hopefully now, you can approve?
> Sorry about the back and forth over the rulers & status bar not updating.
> Shouldn't have been greedy about reducing latency by 2ms by setting
> UPDATE_PRIORITY = GDK_PRIORITY_EVENTS :)
>
>
> On Thu, Feb 15, 2018 at 3:58 PM, Eduard Braun <[hidden email]> wrote:
>
> > Am 15.02.2018 um 12:23 schrieb Yale Zhang:
> >
> > I've updated my custom cross compiler to use MSYS2 packages and finally
> > saw the lack of rule/status bar updates. Unfortunately, it had nothing to
> > do with using MSYS2. I just didn't look hard enough earlier :(
> > The earlier versions (including the binaries) did suffer the problem but
> > only when dragging large rectangles. Plus I had _INKSCAPE_DISABLE_CACHE=1,
> > making the problem less noticeable.
> >
> > So now I know what's wrong. The ruler update priority is G_PRIORITY_LOW =
> > 300, while UPDATE_PRIORITY in SPCanvas::addIdle() is GDK_PRIORITY_EVENTS =
> > 0, so it's no mystery who loses.
> >
> > Changing UPDATE_PRIORITY back to GDK_PRIORITY_REDRAW + 10 fixes the
> > problem. But the ~10ms less latency for immediate drawing (#3) now is
> > reduced because a ~2ms delay is added between SPCanvas::addIdle() and
> > SPCanvas::paint().
> >
> > Of course, this is perfectly usable, but I have an itch to further
> > improve. That 2ms latency is gone if I disable the status bar, so I'd like
> > to do the status bar updates after SPCanvas::paint().
> >
> > But I can't find where the status bar is being drawn. Do you?
> > And also, what is SP_DOCUMENT_UPDATE_PRIORITY and
> > SP_DOCUMENT_ROUTING_PRIORITY in document.cpp? I don't know if those need to
> > be rebalanced.
> >
> >
> > The coordinates are updated by calling "SPDesktop::set_coordinate_status"
> > in "desktop.cpp" (which calls "SPDesktopWidget::setCoordinateStatus" in
> > "desktop-widget.cpp").
> >
> >
> >
> > -yale
> >
> >
> > On Wed, Feb 14, 2018 at 2:30 AM, Eduard Braun <[hidden email]>
> > wrote:
> >
> >> Am 14.02.2018 um 11:09 schrieb Yale Zhang:
> >>
> >> Good, we're getting closer to the same page. Can you please tell me which
> >> of my commits did you include in your testing? If dragging is still
> >> lagging, it sounds like you didn't take change #2 (priorities). You
> >> complained it didn't help or made things worse, but it should be quite the
> >> opposite.
> >>
> >>
> >> As I wrote: I checked out 0bde236 and built the resulting code. It should
> >> therefore have contained all you latest (public) changes.
> >>
> >>
> >> Let me get the MSYS2 headers & libs and do a build to rule out any
> >> library issues.
> >>
> >>
> >> This would certainly help... Even though you keep telling me the stock
> >> builds *should* behave differently with your changes - they don't. If
> >> you're able to test yourself we'll probably safe ourselves some back and
> >> forth as seeing is believing. ;-)
> >>
> >>
> >> "warn me next time it's not relocatable" - I think all you have to do to
> >> relocate was regenerate immodules.cache & loaders.cache. I wonder how the
> >> release packages of Inkscape & Gimp avoid this problem.
> >>
> >>
> >> Ah, if they contain absolute paths that might have been it. As for the
> >> release packages: they contain relative paths in imloaders.cache (MSYS2
> >> contains a relocation patch for gdk-pixbuf2). Earlier versions (built wit
> >> devlibs) included the loaders in libgdk_pixbuf-2.0-0.dll to work around
> >> this (it's a built option)
> >>
> >>
> >>
> >> Yes, my version should be quite fast, but it has little to do with the
> >> GDK optimizations. You should see the same benefits with vanilla GTK
> >> (GTK_CSD=1). For the optimized version, there should be no performance
> >> difference for GTK_CSD because I force the rendering code path to what
> >> GTK_CSD=0 uses, plus some optimizations.
> >>
> >> "I'm not able to resize the Window"
> >> Sorry, I forgot to mention it has my optimized, but work in progress
> >> libgdk-3-0.dll. Please roll back to the stock version
> >> (libgdk-3-0.dll.orig). The optimized one keeps a persistent Cairo Win32
> >> surface for window updates, but resizing isn't handled.
> >>
> >>
> >>
> >> On Tue, Feb 13, 2018 at 6:27 PM, Eduard Braun <[hidden email]>
> >> wrote:
> >>
> >>> I was now able to build 0bde236
> >>>
> >>>    - With the status bar visible I'm getting super fast redraws of the
> >>>    status bar with some occasional redraws of the rulers but everything else
> >>>    is locked when moving a rect.
> >>>    - With the status bar hidden I'm getting more redraws now and also
> >>>    infrequent redraws of the whole UI, however moving the rect is still
> >>>    extremely sluggish.
> >>>    - With the status bar and rulers hidden moving the rect has a usable
> >>>    redraw speed, rest of the UI (now only values in select toolbar I guess)
> >>>    update infrequently.
> >>>
> >>> Comparing with your build linked before (warn me next time it's not
> >>> relocatable, I had to move it to C:\Users\Yale\inkscape.gmesh ;-) ) there
> >>> are some grave differences:
> >>>
> >>>    - Redraw is in fact much faster with your version - are these the
> >>>    gdk changes? Or are we really on to something fundamental?
> >>>    This is also true for GTK_CSD=0!
> >>>    - Also the rest of the UI is updated much more frequently, even with
> >>>    the status bar visible
> >>>    - In your version I'm not able to resize the Window (or rather I can
> >>>    but the parts that were not shown initially are not redrawn and only show
> >>>    some graphical garbage. Is this related to you gdk changes?
> >>>
> >>>
> >>> Am 12.02.2018 um 13:57 schrieb Eduard Braun:
> >>>
> >>> Am 12.02.2018 um 13:12 schrieb Yale Zhang:
> >>>
> >>> Eduard, please pull change #2 (fix priority inversion) before the
> >>> immediate rendering changes. Without it, the lack of status bar & ruler
> >>> updates are expected.
> >>>
> >>>
> >>> I think we're running in circles here... Most of my comments (as well as
> >>> yours regarding direct drawing) referred to #3.
> >>> The only issue I had with #2 was that Rulers seem still to be updated
> >>> with a high priority and prevented the canvas to redraw (in stock MSYS2
> >>> builds and therefore with CSD=0).
> >>>
> >>>
> >>> Yes, I am using CSD=1 in my testing (for both optimized & original GTK).
> >>> But CSD isn't the actual reason for performance difference. It's because of
> >>> the rendering code path CSD=1 uses (draw to CPU memory buffer, then send to
> >>> UpdateLayeredWindow()), vs CSD=0  (draw directly to GDI device context -
> >>> surprisingly this is slower until my optimizations).
> >>>
> >>>
> >>> Please note that CSD=0/1 in our stock MSYS2 builds makes a *huge*
> >>> difference. If that is really not the case for your custom builds we might
> >>> want to start looking into that, too. Maybe we're facing at a more
> >>> fundamental difference. As MSYS2 is the official way to get GTK+ for
> >>> Windows nowadays such a difference might be very relevant for many projects.
> >>>
> >>> Are your cross-compiled libraries using mingw-w64? Which OS are you
> >>> using btw? (I'm usually testing on Windows 10 - I'd not be surprised if
> >>> there's some major difference compared to e.g. Windows 7 wrt to the low
> >>> level drawing functions).
> >>>
> >>> I'm very interested in testing your GDK-modifications and see how they
> >>> behave with the MSYS2 builds, so if you could drop a patch somewhere that
> >>> would be much appreciated!
> >>>
> >>> I did get an error from the CI build after the multithreaded rendering
> >>> feature. It doesn't even get past CMake configure stage, so not very
> >>> useful. That's because the build server doesn't have the Boost libs (which
> >>> I use, not just the headers).
> >>>
> >>>
> >>> I think you looked at the Linux build - Windows CI is "external" via
> >>> AppVeyor and has the required Boost libraries. It's just not working in
> >>> your branch right now because an upstream update broke updating but I
> >>> pushed a workaround for this already in the master branch [1] (that's why I
> >>> suggested to rebase)
> >>>
> >>> [1] https://gitlab.com/inkscape/inkscape/commit/85d7fa343f477d8f
> >>> aae6cbde90ae7a243115fa37 (I messed up the rebase so it's authored by
> >>> Tav, sorry for that)
> >>>
> >>>
> >>>
> >>>
> >>> On Mon, Feb 12, 2018 at 2:41 AM, Eduard Braun <[hidden email]>
> >>> wrote:
> >>>
> >>>> Am 12.02.2018 um 10:15 schrieb Yale Zhang:
> >>>>
> >>>> "As noted before, when rulers are shown there still is no redraw with
> >>>> this change"
> >>>> It works for me on Windows with rulers. Could it be some out of date
> >>>> libraries? I'm still using a custom built cross compiler & libraries (GTK
> >>>> 3.22.26 & glib 2.54.2). I know you're using the MSYS 2 prebuilt libraries.
> >>>> I've been wanting to use those too, but how recent are they?
> >>>>
> >>>>
> >>>> They are usually the latest available (think of MSYS2's MINGW-packages
> >>>> as arch Linux for Windows), right now gtk 3.22.26 and glib 2.54.3.
> >>>>
> >>>> Aside from disabling CSD they are unpatched. Just to make sure we're
> >>>> not comparing apples and oranges: Are you using CSD in your builds or not?
> >>>> This switch made a huge difference before, so if you're working with CSD
> >>>> enabled this might be the likely explanation why some things work in your
> >>>> builds that do not work in the stock builds.
> >>>>
> >>>>
> >>>> "It seems that the immediate drawing of the canvas basically disables
> >>>> drawing of the rest of the UI"
> >>>>
> >>>> You scared me, that would be a most grievous mistake. I just tested it
> >>>> again and don't see any problem. The rulers and status bar still work when
> >>>> dragging an object. Did you build my stream directly or have any other
> >>>> non-trunk changes? Sorry to suggest this but here are binaries you can
> >>>> test. Maybe try copying the GTK & cairo? libs to your build.
> >>>> https://1drv.ms/u/s!AngRQgSreBCehy4R7D3x3Y2vIXPC
> >>>>
> >>>>
> >>>> I used https://gitlab.com/inkscape/inkscape/commit/78d47938194fc52e
> >>>> e085387d9a0dc0753f3ed6d9 as the later commits did not compile for me.
> >>>>
> >>>> I'll check your build this evening.
> >>>>
> >>>> We also have CI builds with MSYS2 available:
> >>>> https://ci.appveyor.com/project/inkscape/inkscape/history
> >>>> If you rebase your branch on master your branch will be built, too (as
> >>>> long as there are not more errors/warnings preventing the build)
> >>>>
> >>>> I hope you're not suggesting to forget about immediate drawing and just
> >>>> fix the drawing priorities. Using priorities would be easier to break,
> >>>> while drawing immediately is fool proof.
> >>>>
> >>>>
> >>>> I'm just saying that priorities have been tweaked before to make all UI
> >>>> update properly and we should aim to retain this state.
> >>>> If direct drawing is compatible with this goal (I guess it was in gtk2)
> >>>> that's probably fine.
> >>>>
> >>>>
> >>>> "Have you published [GTK3] code anywhere? "
> >>>> No, I haven't had time yet. I also want to discuss the problem I posed
> >>>> on StackOverflow and someone suggested IRC, but that I've never used IRC
> >>>> and it sounds very 1990s.
> >>>>
> >>>>
> >>>> It's like SMS... it just works (even today)...
> >>>> A lot easier than all the modern stuff that claims to be easier than
> >>>> IRC.
> >>>>
> >>>> I've talked to gtk devs on IRC before and it's the easiest way to get
> >>>> some interaction (bug reports usually fall into oblivion sooner rather than
> >>>> later).
> >>>>
> >>>>
> >>>> BTW, the optimized GTK also disables clearing the region to be drawn
> >>>> (gdk_window_clear_backing_region()).
> >>>>
> >>>> "Is [render cache] always slow?"
> >>>> It's only much slower if drawing a big area AND the scene complexity is
> >>>> low. For small areas and high complexity scenes, the overhead is much less
> >>>> noticeable.
> >>>>
> >>>>
> >>>> I see... I guess before the low complexity scenes were not that
> >>>> important as redraw times were sufficiently fast anyway.
> >>>> User reports of slow redrawing usually involve blurs (or less
> >>>> frequently other filters).
> >>>>
> >>>>
> >>>> For the multithreaded rendering, it's still a work in progress. AFAIK,
> >>>> I've eliminated all the race conditions with ThreadSanitizer, so it should
> >>>> be stable.
> >>>> I just pushed some further changes to allow the rendering to be
> >>>> incremental like it always has been. It should have that -fpermissive
> >>>> compile error in sp-canvas.cpp fixed, but you might still need it for other
> >>>> files.
> >>>>
> >>>>
> >>>> I'll try to build this evening.
> >>>> As recommended before you could check the CI to make sure your branch
> >>>> is properly built, which should help with testing.
> >>>>
> >>>> Regards,
> >>>> Eduard
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> On Sun, Feb 11, 2018 at 8:37 AM, Eduard Braun <[hidden email]>
> >>>> wrote:
> >>>>
> >>>>> Hi Yale,
> >>>>>
> >>>>> thanks for continuing to investigate this! Some comments:
> >>>>>
> >>>>>
> >>>>> Am 09.02.2018 um 16:02 schrieb Yale Zhang:
> >>>>>
> >>>>> I have an update on my progress. I've made these changes which I'm
> >>>>> requesting to be merged from my simdgenius_inkscape branch
> >>>>>
> >>>>> 1. disable event compression (previously mentioned)
> >>>>>
> >>>>> 2. fix priority inversion (09f55021, previously mentioned) - without
> >>>>> this, dragging objects too fast would cause no redraw.
> >>>>>
> >>>>>
> >>>>> As noted before, when rulers are shown there still is no redraw with
> >>>>> this change
> >>>>>
> >>>>>
> >>>>> 3. draw immediately (78d47938) this partially reverts Krzysztof's
> >>>>> Hack fest 2016 changes like in 0.92.  This reduces latency by ~10ms
> >>>>> (compare cells G22 and E22 in spreadsheet)
> >>>>>
> >>>>> I originally wanted to remove backing store and draw directly to the
> >>>>> window surface, but I ran into this dilema so I didn't do it.
> >>>>>
> >>>>> https://stackoverflow.com/questions/48339792/when-drawing-to
> >>>>> -a-window-are-the-previous-contents-usually-discarded-and-what
> >>>>>
> >>>>>
> >>>>> While this change does indeed speed up drawing a lot I'm not sure it's
> >>>>> for the reason we hope for:
> >>>>> It seems that the immediate drawing of the canvas basically disables
> >>>>> drawing of the rest of the UI (i.e. rulers, coordinates in the lower right,
> >>>>> coordinates in inputs, etc). If I hide all UI elements (Ctrl+F11) I get the
> >>>>> same perceived performance even without your code change.
> >>>>>
> >>>>> While I guess redrawing the canvas is to be preferred over redrawing
> >>>>> other UI elements, not redrawing the rest of the UI at all is probably not
> >>>>> desirable either.
> >>>>> Also it poses the question: Why did gtk2 manage to redraw the canvas
> >>>>> *and* the UI and still yield higher performance than gtk3? So I'm not sure
> >>>>> we're not still missing the actual regression. :-/
> >>>>>
> >>>>>
> >>>>> But there is still way more speedup to be had:
> >>>>>
> >>>>> 1. *rendering cache slows things down 6x!*  Compare cells E9 & E10 in
> >>>>> the spreadsheet.
> >>>>>      WTH?
> >>>>>
> >>>>>
> >>>>> Is it always slow? I guess for something simple like a rectangle it
> >>>>> might not improve things, but maybe things start to change as soon as
> >>>>> filters are involved (or many nodes or anything else that is not easy to
> >>>>> render)?
> >>>>> I admit I was not involved when the rendering cache was added and do
> >>>>> not know its purpose. I tracked down the commit in which it was added [1]
> >>>>> which does not explain anything either, though, so I need to continue
> >>>>> digging... If anybody knows where the changes are actually explained some
> >>>>> feedback is welcome.
> >>>>>
> >>>>> [1] https://gitlab.com/inkscape/inkscape/commit/093f4174abc07b4e
> >>>>> a523617fccdd8028f2670fea
> >>>>>
> >>>>>
> >>>>> 2. optimize GDK (maybe it's only slow on Windows) - compare cells J17
> >>>>> and J23
> >>>>>       I made 2 changes:
> >>>>>       a. disabled layered windows - this is almost the same effect as
> >>>>> setting GTK_CSD=0. I'm not clear why it speeds things up. I'm guessing it
> >>>>> reduces image copying. Layered windows have to draw to CPU memory (GDI
> >>>>> DIB), while non-layered windows draw directly to GPU memory (device
> >>>>> dependent bitmap)?
> >>>>>
> >>>>>       b. replace surface_content = gdk_window_get_content (window);
> >>>>>  in gdk_window_begin_paint_internal()
> >>>>>           with surface_content = CAIRO_CONTENT_COLOR_ALPHA
> >>>>>
> >>>>>           why create/delete a surface just to get the type?
> >>>>>
> >>>>>
> >>>>> Have you published this code anywhere? Also is there any upstream
> >>>>> discussion on this yet which I could follow?
> >>>>>
> >>>>>
> >>>>> 3. multithreaded rendering - I've updated it to work with trunk, so
> >>>>> you can try it. Very little speed up for simple scenes.
> >>>>>
> >>>>>
> >>>>> Unfortunately the code does not compile for me, excerpt from the error:
> >>>>>     sp-canvas.cpp:802:22: error: passing 'const boost::shared_mutex'
> >>>>> as 'this' argument discards qualifiers [-fpermissive]
> >>>>>
> >>>>> Do you want us to compile your code with -fpermissive?
> >>>>>
> >>>>>
> >>>>>
> >>>>> -Yale
> >>>>>
> >>>>>
> >>>>> Regards,
> >>>>> Eduard
> >>>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>> ------------------------------------------------------------------------------
> >>> Check out the vibrant tech community on one of the world's most
> >>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Inkscape-devel mailing listInkscape-devel@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/inkscape-devel
> >>>
> >>>
> >>>
> >>
> >>
> >
> >

> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot

> _______________________________________________
> Inkscape-devel mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/inkscape-devel



----- End forwarded message -----

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Inkscape-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/inkscape-devel


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Inkscape-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/inkscape-devel